Media | Steam, water, air |
Ambient temperature | -20 to 70 ˚C |
Media temperature | up to 120 ˚C (Above 120˚C a water-filled loop must be installed) |
Enclosure | IP 65 |
Action type acc. to EN 60730 | BCP-2B |
BCPL/ BCPH-2BDF | |
Electrical connection | |
Plug, DIN 43650, Pg 11 | |
Switch type | SPDT, snap action microswitches: |
type A and type B | |
Contact material: | Type A: Silver/ gold (Au plated Ag) |
Type B: Silver (AgCdO) | |
Contact load | BCP type A (silver/ gold contact) |
Minimum: 4mA, 5V | |
Maximum: 1) AC-1: 6A, 250V 2)AC-15: 1A, 250 V 3)DC 13 10W, 250 V |
|
Contact load | BCP type B (silver contact) |
Minimum: 500 mA, 24V | |
Maximum: 2) AC-1:10A, 250V 2) AC-15: 2A, 250V 3) DC 13: 50W, 250V |
|
Expected electrical lifetime | Min. 250 000 cycles under full contact load |
1) If used with current higher than 400mA the gold will disappear and the unit can’t be used at a lower current again. | |
2) AC-1 Ohmic load, cosφ 1 | |
3) AC-15 inductive load like coil and contactors with, cosφ 0.3 | |
4) DC-13 Direct current load |